All Categories
EN

Home > Products > By Application > Wireless Temperature and Humidity Controller

CE RED Certificate Acrel ATE Wireless Temperature Sensors


● Application: Switchgear, Busbar, Bus duct, Electric contact, Cable joint,Rain main unit and etc
● Range of Measurement: -50℃~+125℃
● Communication: GFSK Wireless Communication
● Installation: Bolted, Magnetic, Belt, Alloy Sheet Fixed
● Protection Level: IP68 (Optional)
● Power Supply: Battery or CT Sensing Power
● Standard&Certificate: CE

  • Overview
  • Parameter
  • Certificates
  • Customer Questions & Answers
  • Contact us

Application

1.Switchgear 2.Power Cable 3.Busbar  4.CB fixed Contact

image

image

Overview

ATE series wireless temperature measuring sensor has been developed in compliance with Specification for Wireless Temperature Measuring equipment, NB/T 42086-2016. It is suitable for 3-35kV indoor switchgears, including built-in switchgears, handcart switchgears, fixed switchgears and loop-net switchgears. It is also suitable for 0.4kV low-voltage switchgears such as fixed switchgears and drawer switchgears. The wireless temperature sensors can be installed at any heating point in switchgears, the device utilizes the wireless data transmission technology for real-time transmission of monitored temperature data. In addition, it can be transmitted to display device or remote intelligent monitoring system.

Parameters

Items

Features
EnvironmentTemperature-40℃~125℃
Humidity≤95%
atmospheric pressure86kPa~106kPa
ATE200 Active wireless temperature sensorWireless frequency470MHz
Communication distance150m in open area
Sampling frequency25s
Transmitting frequency25s-5min
Power sourceBattery
InstallationMagnetic / bolted /Belt
Range of temperature-50℃~+125℃
Precision±1℃
ApplicationJoints in high or low voltage switchgears
Battery life≥5 years
400 Passive wireless temperature sensorWireless frequency470MHz
Communication distance150m in open area
Sampling frequency15s
Transmission frequency15s
Power sourceCT-powered, starting current≥5A
Installationalloy chip fixing
Sensor probealloy bottom
Range of temperature-50℃~125℃
Precision±1℃
ApplicationJoints in high or low voltage switchgears
ATE200P Outdoor wireless temperature sensorWireless frequency470MHz
Communication distance150m in open area
Sampling frequency25s
Transmitting frequency25s-5min
Power sourceBattery
Installationbolted /Belt
Range of temperature-50℃~+150℃
Precision±0.5℃
ApplicationVoltage switchgears
Battery life≥5 years
Protection levelIP68
Product Size 

image

image

Solution

image

ItemsFeatures
EnvironmentTemperature-40℃~125℃
Humidity≤95%
atmospheric pressure86kPa~106kPa
ATE100M/100/200 Active wireless temperature sensorWireless frequency470MHz
Communication distance150m in open area
Sampling frequency25s
Transmitting frequency25s-5min
Power sourceBattery
InstallationMagnetic / bolted /Belt
Range of temperature-50℃~+125℃
Precision±1℃
ApplicationJoints in high or low voltage switchgears
Battery life≥5 years
400 Passive wireless temperature sensorWireless frequency470MHz
Communication distance150m in open area
Sampling frequency15s
Transmission frequency15s
Power sourceCT-powered, starting current≥5A
Installationalloy chip fixing
Sensor probealloy bottom
Range of temperature-50℃~125℃
Precision±1℃
ApplicationJoints in high or low voltage switchgears
ATE100P/200P Outdoor wireless temperature sensorWireless frequency470MHz
Communication distance150m in open area
Sampling frequency25s
Transmitting frequency25s-5min
Power sourceBattery
Installationbolted /Belt
Range of temperature-50℃~+150℃
Precision±0.5℃
ApplicationVoltage switchgears
Battery life≥5 years
Protection levelIP68
Customer Questions & Answers
  • Answer:

    Possible Reasons: A.The sensor's power switch is not turned on; B.The sensor and transceiver are not matched; C.Turn on the sensor first, and then power on the transceiver, wait about 15MIN. The distance between the sensor and the transceiver is far.

    marry August 31, 2022
  • Answer:

    Possible Reasons: A.Installing layers of sensor's alloy plates are not enough, at least 3 layers; B.The sensor and transceiver are not matched; C.The starting current when the sensor is installed is less than 5A; D.The distance between the sensor and the transceiver is far.

    marry August 31, 2022
Your Name
E-mail *
Phone/Whatsapp
Country
Your identity (dealer or individual)
Your Inquiry *
Clicky